Automotive components
Interior and functional parts in nylon, PP and ABS.
Divine Precision
Get Instant Quote
Divine Precision
Plastic parts from prototype tooling through short production runs, molded in ABS, PC, nylon, PP and PEEK to ±0.02 mm on critical features. Send a drawing for DFM feedback and a quote.
Low volume injection molding usually means somewhere between 100 and 10,000 pieces. That is an industry convention rather than a hard rule. It suits pilot builds, bridge production while demand is still uncertain, and parts that will never justify a full production tool. Divine Precision molds plastic parts to your drawing for these runs, and for programs that later scale.
The sequence that protects your budget is to prove the design in machined parts, then commit to a mold. Machined prototypes let you test fit and function before any tooling is ordered, and the same drawing then goes into a walls, textures and gates review before the tool is made. If the quantity is too low to justify a mold at all, plastic machined parts are cut from stock. Metal parts that go into the same assembly are turned and milled to drawing with CNC machining.
Divine Precision works from a Hong Kong office and a factory in Dongguan, China. Drawings are quoted and answered within one business day, and parts ship worldwide. For plastic injection molding in China, that means a molded housing, its machined metal parts, finishing, assembly and packaging can be quoted and managed through one supplier, as set out under turnkey manufacturing from Southern China. To start, send your drawing for a quote.
Choose it for pilot builds, bridge production and short-run end-use parts, usually 100 to 10,000 pieces, that will not justify a full production tool. Best in ABS, PC, nylon, PP or PEEK, with walls, textures and gates reviewed before tooling.
Lower commitment, resin-matched engineering, and a quote that starts from your drawing rather than a minimum volume.
Prototype tooling through to production tooling, chosen to fit your quantity and budget. You pay for the tool your run needs, not the one a million-piece program would need.
Critical dimensions are called out on your drawing and confirmed at quote. Stable resins such as PC and ABS suit the tightest callouts.
ABS, PC, nylon, PP and PEEK, with guidance on which suits strength, heat or wear. ABS, nylon and PEEK injection molding are all quoted from the same drawing package.
Wall thickness, texture and geometry feedback comes before the tool is made, which avoids costly tool changes. Our production process begins with drawing review.
Quoted from prototype tooling up to millions of parts, so demand growth does not force a change of supplier or a requalification of the part.
Specify surface texture on the drawing by SPI finish grade, VDI 3400 number or Mold-Tech (MT) reference, so the finish on each surface is agreed before tooling.
Firm figures where we publish them. Everything else is confirmed in your quote, against your drawing and resin.
| Item | Detail |
|---|---|
| Tolerance | ±0.02 mm on critical features in stable resins; PP and nylon set per feature |
| Resins | ABS, PC, nylon, PP, PEEK |
| Surface / texture | SPI, VDI or MT texture callout, specified per part |
| Tooling | Prototype tooling to production tooling |
| Wall thickness | Set during DFM, depends on resin and flow length |
| Part size | Confirmed per quote |
| Item | Detail |
|---|---|
| Run size | Prototype tooling to millions of parts; low-volume programs quoted per project |
| Minimum order | Confirmed per quote |
| Tooling lead time | Confirmed per quote |
| Production lead time | Confirmed per quote |
| File formats | STEP, IGES, SolidWorks (.sldprt), ProE (.prt); 2D PDF or DWG with GD&T |
| Quotation | Response within one business day; NDA on request before quoting |
| Shipping | Worldwide via DHL, FedEx, UPS; sea or air freight for larger loads |
Match the resin to the job (impact, heat, wear or chemical exposure) before tooling is cut. Each of these resins behaves differently in the mold, and the choice shapes wall design, texture and achievable tolerance.
Resin is verified against its documentation before it reaches the press, and the lot stays attached to the parts. See the full quality process.
Initial parts are measured against your drawing, and the run continues once the report is approved. How we inspect.
Parts are pulled and measured during the run to catch drift early, with the sampling plan agreed in advance. Quality details.
Parts get a dimensional and visual check, and each lot ships with its inspection record. Read the quality process.
Molded parts go into Automotive & EV, Consumer & 3C and Industrial products. To scope a run, send us the drawing.
01
Interior and functional parts in nylon, PP and ABS.
02
Covers and cases for devices and sensors.
03
Knobs, trims and functional plastic components.
04
Short-run parts for equipment and fixtures.
05
Real molded parts for launch, before production tooling is committed.
06
Spares and low-demand parts molded without a mass-production commitment.
Mold ownership and cost are settled at quote, before any steel is cut.
Ask a QuestionOwnership, storage and transfer of the tool should be agreed in writing before you approve tooling. Ask for those terms alongside the tooling quote. The mold is built to your part drawing, and an NDA is available before quoting.
Tooling spread across the run is usually the largest factor. Resin, part size and complexity, texture, cycle time and quantity also matter. Cost is quoted per project from your drawing, with no generic price.
A common rule of thumb for general-purpose resins is about 1–3 mm. Thinner walls are possible depending on resin and flow length. The DFM review confirms what your part and resin can support.
ABS, PC, nylon, PP and PEEK. ABS suits housings, PC suits impact and clarity, nylon suits wear, PP suits chemical resistance and hinges, and PEEK suits high temperature and chemical load.
Send a STEP or IGES model with a 2D PDF or DWG drawing showing GD&T. SolidWorks and ProE files also work. Uploads are secure and confidential, and an NDA is available on request before quoting.
Submit your drawing, quantity and resin through the quote form, or email or phone us. We reply within one business day. Parts ship worldwide via DHL, FedEx or UPS, or by sea or air freight for larger loads.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.