Enclosures & housings
Formed and welded boxes, covers and cabinets built to drawing, from prototype to series.
Divine Precision
Get Instant Quote
Divine Precision
Cutting, bending, welding and assembly under one roof: precision sheet metal enclosures, brackets, chassis and panels from flat sheet to finished part, with delivery as fast as 6 days.
Divine Precision builds precision sheet metal parts to your drawing: enclosures, brackets, chassis, panels and structural parts, cut, formed, welded, finished and assembled in one workshop. One team owns the flat pattern, the bend angles and the fit-up, so tolerance does not get lost between vendors.
A sheet metal prototype starts at one piece. The same process and the same quote path carry sheet metal prototype fabrication into batch production, so a validated design does not need re-sourcing. Engineering sits in our Hong Kong office, and parts are made at the Dongguan factory. On every job, the first part is measured against your drawing, and the batch runs only once you approve that first-article report.
DFM tip: keep holes, slots and tabs clear of bend lines, because features sitting too close to a fold distort when the metal is formed. The Sheet Metal & Laser Cutting Guide sets out flat-pattern and bend-relief practice. When you upload your drawing, the same checks come back as DFM notes with the quote.
Choose sheet metal fabrication for enclosures, brackets, chassis and panels in stainless steel, aluminum, galvanized steel or copper. It suits prototypes from one piece through batches of 10,000+, especially parts that combine flat patterns with formed, welded or assembled features.
Every stage of precision sheet metal fabrication sits in one workshop, so a single team answers for tolerance, lead time and fit-up.
Laser-cut profiles from your flat pattern, with plasma, waterjet, wire EDM, punching and shearing for other blank types. Edges come off clean and ready to form. See Laser Cutting.
CNC press-brake bending holds drawing angles from the first piece to the last in a batch. Folding, stamping and rolling complete our sheet metal bending services.
MIG, TIG, spot and robotic welding join frames, seams and sub-assemblies, for prototypes and for production volumes alike.
Tapping, drilling, countersinking and counterboring add threaded and fit-critical features to formed or welded parts. Heavier features move to CNC Machining.
Welding, riveting, fastening, staking and hardware insertion deliver assembled units. Dimensional and functional checks, torque and force verification and leak testing run where the drawing specifies.
Custom enclosures scale from prototype to series, with in-process sampling and a 100% final inspection before the parts are packed and shipped.
The values below are the limits we put on a sheet metal quote. Some features can go finer depending on the part, so send the drawing and we will check it before you order.
| Item | Specification |
|---|---|
| Tolerance | ±0.1 mm on fabricated parts |
| Materials | Stainless steel, aluminum, galvanized steel, copper |
| Cutting | Laser, plasma, waterjet, wire EDM, punching, shearing |
| Forming | CNC bending, folding, stamping, rolling |
| Welding | MIG, TIG, spot and robotic welding |
| Hardware & assembly | Inserts, riveting, fastening, staking |
| Finishing | Powder coating, brushing, anodizing, painting, plating |
| Item | Specification |
|---|---|
| Minimum order | 1 piece |
| Prototype lead time | As fast as 6 days |
| Production lead time | Set per job on your quote; rush slots can be requested |
| Typical batch size | 1–10,000+ pieces |
| File formats | STEP or IGES plus 2D drawing with GD&T; SolidWorks, ProE, PDF, DWG |
| Quotation | Within hours, with DFM notes |
| Shipping | Worldwide by DHL, FedEx, UPS; sea or air for larger lots |
Sheet metal in the grades your drawing calls for. Heat numbers are recorded at receiving, and material certificates are available on request with every lot. Finishes are applied in-house or with trusted partners.
Material is checked against the mill certificate and the heat number is recorded at receiving, so every lot traces from sheet to shipment under our ISO 9001:2015 quality system.
The first part is measured on a CMM against your drawing and a first-article inspection report is sent. The batch starts only after you approve it.
During the run, operators sample parts with statistical process control to an AQL plan, so drift in a bend angle or hole position is caught at the machine. The 100% inspection comes at the end of the lot.
Every part in every lot gets a dimensional and visual check, then ships with its inspection record and material certificate, packed in VCI film or anti-rust oil to survive sea or air freight.
Enclosures, chassis, brackets and panels built to customer drawings for Industrial, Automotive & EV, Medical and Robotics & Automation customers. Have a similar part? Send the drawing.
01
Formed and welded boxes, covers and cabinets built to drawing, from prototype to series.
02
Welded and riveted frames with hardware inserted, delivered as assembled units.
03
Bent and punched mounting parts that combine flat patterns with formed features.
04
Formed blanks with tapped, drilled and countersunk features added by CNC Machining.
Still looking for something? Send a drawing and the quote comes back within hours, with DFM notes.
Ask a QuestionIt is cutting, bending, welding and assembling sheet metal into parts that hold a stated drawing tolerance. Ours is ±0.1 mm on fabricated parts, covering enclosures, brackets, chassis and panels.
±0.1 mm on fabricated parts. Some features can go finer depending on the part, so send your drawing and we will confirm what can be held before you commit.
Yes. Orders start at 1 piece, with delivery as fast as 6 days, and the same process scales to 10,000+. To start, request a sheet metal prototype quote with your drawing attached.
A STEP or IGES model plus a 2D drawing with GD&T is ideal. SolidWorks, ProE, PDF and DWG files are also accepted. Uploads are secure and confidential, and an NDA is available on request.
Sheet metal work covers stainless steel, aluminum, galvanized steel and copper. Finishes include brushing, anodizing, painting, powder coating and plating, with passivation, bead blasting, chromate and polishing also available.
Parts are made under our ISO 9001:2015 quality system with full traceability. Material certificates, first-article inspection reports and inspection reports are available on request with each lot.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.