Dental Handpiece Components
Small turned and milled stainless and titanium components for dental handpieces, made in repeat lots.
Divine Precision
Get Instant Quote
Divine Precision
Stainless and titanium parts for dental handpieces, ventilators, surgical robots and disability aids.
Dental handpiece components are where Swiss turning earns its place. Small stainless and titanium parts run on Swiss automatic screw machines and CNC twin-spindle turn/mill machines, from 1 piece to 100k+. Prototypes ship in 3 days. That is medical CNC machining made to your drawing.
Ventilator fittings, surgical robot brackets and assistive-device hardware follow the same route; consumer-style housings match Consumer & 3C programmes. Every lot is released after CMM first-article approval and stays traceable under our ISO 9001:2015 quality system. Material suitability and biocompatibility certification stay with you. An NDA is available. See Precision Machined Medical Parts, browse the capability brochures, or send your drawing for a quote.
Small turned and milled stainless and titanium components for dental handpieces, made in repeat lots.
Fittings, connectors and housings machined for airflow assemblies, with functional and leak testing on assemblies.
Brackets, housings and drive-train components machined on 5-axis centres, also used for Robotics & Automation parts.
Machined parts for assistive and mobility devices, from one-off prototypes to repeat lots.
Stainless and titanium for strength, aluminum for light parts, and PEEK, POM and other plastics where metal doesn't fit. For Gr.2 and Gr.5 work, see titanium machined parts.
Small round parts and fittings on Swiss and twin-spindle machines, with cross holes, flats and threads. Unsure which suits your part? See Swiss vs CNC turning.
Complex housings and brackets machined in fewer setups, in aluminum, stainless steel and titanium.
Passivation for stainless parts, anodize, deburring and laser marking, then CMM inspection and packing.
Send a medical drawing and our engineering team replies within one business day.
Ask a QuestionComputer-controlled milling and turning makes repeatable metal and plastic components such as dental handpiece parts, surgical robot housings and ventilator fittings. Medical CNC machining covers one-off prototypes through to repeat production lots, all cut to your drawing.
Our certified quality system is ISO 9001:2015, with traceability from raw material to finished part. ISO 13485 is not among our listed certifications, so if your programme requires a 13485-certified supplier, tell us before quoting. We supply FAI and inspection documentation to your requirements.
The tightest is ±0.005 mm, with diameters at ±0.005 mm ground and ±0.01 mm turned, Ra 1.6 µm as the standard finish and Ra 0.4 µm on request; machining tolerances explains how to call them out.
Yes. The minimum order is 1 piece. Prototypes can ship in as little as 3 days for CNC and 7 days for 5-axis, and the same process scales to production runs of 100k+ pieces without changing suppliers.
Each lot ships with a material certificate (mill certificate with heat number) and an inspection record, backed by full traceability from raw material to finished part. FAI and PPAP packages are available on request, and the FAI report is sent before the batch starts.
Upload a STEP or IGES model plus a 2D drawing with GD&T through Get Instant Quote. Quotes come within one business day. Files are handled securely, and an NDA is available on request before you share anything.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.