CNC Turned Parts
Made-to-print turned parts and precision turned components from our Hong Kong and Dongguan facilities, one piece to 100k+ per run, in aluminium, stainless steel, brass and steel.
Divine Precision
Get Instant Quote
Divine Precision
Nothing here is off-the-shelf. These are the component families we produce most often, with the tolerances and materials each one typically calls for —a starting point for your own drawing.
Made-to-print turned parts and precision turned components from our Hong Kong and Dongguan facilities, one piece to 100k+ per run, in aluminium, stainless steel, brass and steel.
Custom aluminum parts, from bushings and housings to knobs, spacers and heat-sink plates. They are CNC milled and turned in 6061, 6082, 7075 or 5052, then anodized or bead blasted.
Shafts, pins, valve stems and fittings turned from bar to your drawing, passivated or electropolished. 17-4PH bearing diameters are ground to ±0.005 mm, with the condition set per drawing. Send your drawing for a quote.
Nozzles, hex fittings, inserts and connector bodies machined in free-machining brass, plated on request.
Rings, spacers, insulators and wear parts machined burr-free from PEEK, POM, PA66 and PTFE. Upload your drawing and get a quote within one business day.
One Gr.5 prototype, heat-traced, quoted within one business day. Titanium CNC machining in Gr.2 and Gr.5, plus Inconel machining in high-nickel alloys, made to your drawing.
Made-to-print VCR-type fittings: glands, nuts and gaskets, electropolished and packed particle-free.
Lead screws, pistons, rotors and shafts in 1215, 12L14 and 4140, each lot traced to its mill heat number. Upload your STEP file and drawing for a quote.
Custom hydraulic fittings, adapters, plugs and valve bodies machined to your drawing, from one piece. Send your drawing and get a reply within one business day.
Machined contacts for connectors and sensors, Swiss-turned in volume, with the mating diameter ground to ±0.005 mm. Send your drawing and the first pieces can ship in 3 days.
Made-to-print port housings and rings for pressure, transducer and oxygen sensors, with sealing faces to Ra 0.4 µm on request and threads and O-ring grooves cut to your drawing.
All components are made to your specification. The families above are reference only —you send the drawing, we build to it.
STEP or IGES for geometry, plus a 2D drawing for tolerances, threads and finish.
Within hours we return pricing together with design-for-manufacturability notes on your part.
We machine one part, report it in full, and only then run the batch.
Common grades are on the rack, so prototypes start the day they are approved. Special alloys arrive with mill certificates traceable to the heat number.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.