Brackets & mounting plates
Stainless plates and supports cut to the drawing, ready for bending or assembly.
Divine Precision
Get Instant Quote
Divine Precision
Fiber laser cutting of stainless steel sheet, made to your drawing from one piece to production runs. Heat-number traceable material, a first article approved by you before the run, a quote within hours and an inspection record with every lot.
We offer custom laser cutting of stainless steel from DWG, STEP or IGES files, from prototype brackets to production panels, plates and chassis parts. Each lot starts from certified sheet recorded by heat number, and production begins only after you approve the first article.
A fiber laser suits stainless, a reflective metal many other lasers handle poorly. It cuts sharp corners, small holes and fine contours that punching and shearing struggle to reproduce. Edge finish on thicker stainless depends on grade and geometry, so mark cosmetic faces or bright edges on the drawing and we confirm finishing before the run. Laser time and cost climb with thickness; the cutting thickness limits for stainless, aluminium and copper differ from metal to metal.
The same flat parts can go on to bending, finishing and assembly with us. Forming and welding are handled through sheet metal fabrication. To start, send your drawing for a quote.
Choose it for flat stainless brackets, panels, plates, chassis parts, shims and gaskets with complex contours, small holes or fine details. It suits one prototype through 10,000+ pieces, with stainless at 0.5–8 mm recommended and up to 15 mm possible.
Fiber laser cutting, efficient nesting and engineers who recommend cutting parameters for your grade, thickness and design.
Recommended range of 0.5–8 mm, with up to 15 mm possible depending on grade and geometry. Send the file and we confirm what your part needs.
Mill certificate checked and heat number recorded at receiving, so every cut part traces back to its raw sheet.
Fiber laser cuts give smooth edges with minimal burrs and low heat distortion, so many parts need little or no secondary deburring.
With no tooling to make, prototypes move quickly. Quotes come back within hours; upload your file to start.
Change a contour in the file instead of a die. This suits low-volume stainless runs and design revisions between batches.
Advanced nesting software cuts waste on costly stainless sheet and keeps complex shapes and small cutouts practical.
Recommended ranges balance quality, speed and cost; maximums depend on alloy and design, and the thickness limits for stainless, aluminium and copper differ by metal.
| Item | Detail |
|---|---|
| Stainless steel | 0.5–8 mm recommended, up to 15 mm |
| Mild steel | 0.5–12 mm recommended, up to 20 mm |
| Aluminum | 0.5–8 mm recommended, up to 12 mm |
| Copper / Brass | 0.5–6 mm recommended, up to 8 mm |
| Technology | Fiber laser, nesting software |
| Edge quality | Clean edges, minimal burrs |
| Sheet metal tolerance | ±0.1 mm |
| Typical parts | Brackets, panels, plates, chassis parts |
| Item | Detail |
|---|---|
| Minimum order | 1 piece |
| Prototype lead time | Rapid |
| Production lead time | Confirmed on your quote |
| Typical batch size | 1 to 10,000+ pieces |
| File formats | STEP, IGES, SolidWorks, ProE, DWG, DXF, PDF |
| Quotation | Within hours, with DFM notes |
| Shipping | Worldwide via DHL, FedEx and UPS; EXW, FOB, DDP |
Certified material arrives with a mill certificate and heat number. Unsure of the grade? See our 303 vs 304 stainless options comparison; passivating stainless parts restores corrosion resistance after cutting.
Material certificates are checked against the drawing and the heat number is recorded at receiving, so each lot is traceable from raw sheet to the box it ships in. How we inspect.
The first part off the laser is measured on a CMM against the drawing, and the batch starts only after you approve the report. Read the quality process.
Operators sample parts through the run with statistical process control and AQL checks, so edge or dimension drift is corrected at the machine. See how it works.
Every part gets a final dimensional and visual check under our ISO 9001:2015 certified quality system, then is packed and shipped with its inspection record. Full inspection details.
Typical stainless and sheet-metal part families we cut. Customer-specific work is never shown without written permission.
01
Stainless plates and supports cut to the drawing, ready for bending or assembly.
02
Flat stainless panels and enclosure parts, ready to bend or finish.
03
Structural flat parts for equipment frames and assemblies.
04
Thin stainless rings and shims cut cleanly, with no tooling.
Still have a question? Our team answers within one business day.
Ask a QuestionThickness, grade, part size and contour complexity set cutting time, while quantity, nesting efficiency, finishing and inspection requirements shape the rest. Upload a drawing and the quote comes back within hours with nesting and DFM notes.
We recommend 0.5–8 mm for the best balance of quality, speed and cost, with up to 15 mm possible depending on grade and geometry. Thicker sections cut more slowly and cost more, so thickness limits by metal matter when you set the design.
For production flat parts, a fiber laser: it cuts fast, holds fine detail and needs no tooling. That is the process we use for stainless sheet, with advanced nesting software to reduce scrap.
STEP, IGES, SolidWorks, ProE, DWG, DXF and PDF all work. A STEP or IGES model plus a 2D drawing is ideal. Uploads are confidential, and we sign an NDA on request.
The minimum order is 1 piece, and orders run from a single part to 10,000+ pieces. Prototypes are turned around rapidly; production timing and any expedite for urgent lots are confirmed on your quote.
Yes. Bending and assembly go through sheet metal fabrication, and stainless can be passivated. Parts ship worldwide from our Dongguan factory via DHL, FedEx or UPS, or by sea or air freight for larger loads.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.