Each rod or bar is matched to its material certificate and lot number on arrival. The lot number stays with the stock through cutting, so a finished ring or spacer traces back to its source.
Divine Precision
Get Instant Quote
Divine Precision
Rings, spacers, insulators and wear parts machined burr-free from PEEK, POM, PA66 and PTFE. Upload your drawing and get a quote within one business day.
| Capability | |
|---|---|
| Size envelope | Ø3–80 mm; stock up to 200 mm long, slenderness set by the drawing |
| Thin features | Wall thickness and L/D on slender PTFE and PEEK parts are reviewed against your drawing at quote |
| Turned tolerance | ±0.01 mm on diameters; PA66 and PTFE features that swell or creep are confirmed at quote |
| Measurement state | Temperature and moisture condition for critical features agreed per drawing |
| Surface finish | Ra 1.6 µm standard |
| Threads | M1.6–M36, UNC/UNF |
| Secondary features | Cross holes, flats, grooves, knurling, laser marking |
| Ordering | |
|---|---|
| Quoting | File upload, email or phone; NDA on request |
| Order size | From 1 piece; batches of 100–100,000+ |
| Prototypes | 3 days on the fast track, 2–3 weeks typical |
| Production | 4–6 weeks typical |
| File formats | STEP, IGES, SLDPRT, PRT, PDF, DWG; a STEP or IGES model plus a 2D drawing with GD&T is ideal |
| Packing | Plastic trays and bags; export lots follow sea-freight packing for machined parts |
Each rod or bar is matched to its material certificate and lot number on arrival. The lot number stays with the stock through cutting, so a finished ring or spacer traces back to its source.
Before production, a sample part is measured on the CMM in the temperature and moisture state agreed for your drawing, because plastics shift with both. You receive the FAI report, and production is released on your sign-off.
During the run, operators pull samples of the critical diameters and bores under a sampling plan. Tool wear and heat build-up in soft material show up early, before a lot is affected.
Every piece in a lot is checked for dimensions and surface condition, including burrs and tool marks on edges. The material certificate and inspection record ship with the lot, made under our ISO 9001:2015 quality system.
Insulators, spacers, bushings, wear rings and seals machined for each sector below. A medical example is in precision machined medical parts.
Insulators, spacers and wear parts for vehicle and charging assemblies.
Low-friction bushings and wear rings for joints and actuators.
PEEK and PTFE wear parts for fluid handling and machinery.
Small insulating and structural parts for electronics and devices.
Insulators and spacers for battery, storage and power equipment.
Precision insulating components for servers and test hardware.
Still looking for something? Send your drawing and our team answers within one business day.
Ask a QuestionYes. PEEK, POM, PA66 and PTFE are turned and milled to ±0.01 mm on diameters. PA66 swells with moisture and PTFE creeps under load, so those features are reviewed at quote.
Yes. We mill and turn engineering plastics, including 3-, 4- and 5-axis work. Send a STEP file with a 2D drawing, and cross holes, flats, grooves and threads are quoted together with the main profile.
Cost depends on material grade, geometry, tolerance, quantity and the number of setups. PEEK stock costs more than POM or PA66, and tight tolerances add inspection time. Upload your files for a quote based on your drawing.
The minimum order is one piece. Prototypes take 3 days on the fast track or 2–3 weeks typically. Production takes 4–6 weeks typically, and rush options are confirmed per quote.
We accept STEP, IGES, SLDPRT, PRT, PDF and DWG through the contact page, by email or by phone. Uploads are secure and confidential, and an NDA is available on request before quoting.
A material certificate and inspection record come with every lot, and FAI or PPAP packages are available on request. Parts are made under our ISO 9001:2015 quality system with full traceability from raw material to finished part.
One Gr.5 prototype, heat-traced, quoted within one business day. Titanium CNC machining in Gr.2 and Gr.5, plus Inconel machining in high-nickel alloys, made to your drawing.
Made-to-print turned parts and precision turned components from our Hong Kong and Dongguan facilities, one piece to 100k+ per run, in aluminium, stainless steel, brass and steel.
Machined contacts for connectors and sensors, Swiss-turned in volume, with the mating diameter ground to ±0.005 mm. Send your drawing and the first pieces can ship in 3 days.
Custom hydraulic fittings, adapters, plugs and valve bodies machined to your drawing, from one piece. Send your drawing and get a reply within one business day.
Made-to-print port housings and rings for pressure, transducer and oxygen sensors, with sealing faces to Ra 0.4 µm on request and threads and O-ring grooves cut to your drawing.
Made-to-print VCR-type fittings: glands, nuts and gaskets, electropolished and packed particle-free.
Nozzles, hex fittings, inserts and connector bodies machined in free-machining brass, plated on request.
Lead screws, pistons, rotors and shafts in 1215, 12L14 and 4140, each lot traced to its mill heat number. Upload your STEP file and drawing for a quote.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.