Before a bar or billet is cut, its mill certificate and heat number are matched to the grade on your drawing, so the alloy you specified is the alloy in your fitting.
Divine Precision
Get Instant Quote
Divine Precision
Custom hydraulic fittings, adapters, plugs and valve bodies machined to your drawing, from one piece. Send your drawing and get a reply within one business day.
Made-to-print fittings from a manufacturer that quotes straight from your drawing. If all you have is a sample, we can reverse-engineer it into a drawing.
| Dimensional capability | |
|---|---|
| Threads | M1.6–M36, UNC/UNF; other forms confirmed on quote |
| Fitting body diameter | Ø 3–80 mm |
| Sealing and thread-land diameters | ±0.005 mm when ground, ±0.01 mm when turned (how tolerances are called out) |
| Part length | Up to 200 mm cut from billet; length-to-diameter ratio follows your drawing |
| Surface finish | Ra 1.6 µm standard, Ra 0.4 µm on request |
| Secondary features | Cross holes, flats, knurling, grooves, laser marking; deburred internal passages |
| Ordering | |
|---|---|
| Minimum order | 1 piece |
| Production lead time | 4–6 weeks typical |
| Prototype lead time | 3 days at the fastest, 2–3 weeks typical (prototype machining) |
| Batch size | From 100 to 100,000+ pieces |
| Files we accept | STEP or IGES model with a 2D drawing carrying GD&T is ideal; SolidWorks, ProE, PDF and DWG also open |
| Packing | Anti-rust oil and VCI film wrap, in plastic trays or bags |
Before a bar or billet is cut, its mill certificate and heat number are matched to the grade on your drawing, so the alloy you specified is the alloy in your fitting.
Sample fittings are checked against your drawing on our CMM, covering thread and port dimensions, and the full report reaches you for sign-off. The production lot is released only on your approval.
During the run, operators pull parts on an AQL sampling plan, so drift in a thread, bore or sealing diameter is caught at the machine rather than at the end of a lot.
Every lot then gets a complete dimensional and visual check. The material certificate and inspection record ship with the parts, traceable to raw material.
Thread-conversion adapters in 303 or 4140, up to Ø 80 mm, for heavy-equipment fluid lines.
Cross-drilled plugs in zinc-plated 12L14, ±0.01 mm turned, for vehicle fluid connections.
Miniature adapters from Ø 3 mm with M1.6 threads for actuator and gripper lines.
Passivated 316L plugs and adapters for corrosive-media lines, one piece to production runs.
Knurled, laser-marked connector bodies with ±0.005 mm ground diameters.
Brass C36000 or 316L fluid connectors for compute hardware, prototype in as little as 3 days.
Need a fitting quoted? Send your drawing and we reply within one business day.
Ask a QuestionFor standard catalog sizes, a distributor is fastest. When you need a non-stock thread, port layout, material or dimension, a made-to-print supplier is the better route: we machine fittings from your drawing, starting at one piece.
We work from drawings. A STEP or IGES model plus a 2D drawing with GD&T is ideal. If you only have a physical sample, reverse engineering turns it into a drawing before machining starts.
The minimum order is one piece. Prototypes ship in 3 days at the fastest and 2–3 weeks typically. Production runs take 4–6 weeks typically, and your quote confirms the date for your part.
Diameters hold ±0.005 mm ground and ±0.01 mm turned, called out as described in our machining tolerances guide. Threads run M1.6–M36 plus UNC/UNF; other thread and port forms, and any leak-test requirement, are confirmed on the quote.
Stainless 303, 304, 316L and 17-4PH, brass C36000 and 12L14 steel lead the list, with carbon steel, aluminium, titanium and engineering plastics also available. Finishes include passivation, electroless nickel and zinc plating.
Yes. An NDA is available on request before we open or quote your drawing, and uploads are secure and confidential.
One Gr.5 prototype, heat-traced, quoted within one business day. Titanium CNC machining in Gr.2 and Gr.5, plus Inconel machining in high-nickel alloys, made to your drawing.
Made-to-print turned parts and precision turned components from our Hong Kong and Dongguan facilities, one piece to 100k+ per run, in aluminium, stainless steel, brass and steel.
Machined contacts for connectors and sensors, Swiss-turned in volume, with the mating diameter ground to ±0.005 mm. Send your drawing and the first pieces can ship in 3 days.
Made-to-print port housings and rings for pressure, transducer and oxygen sensors, with sealing faces to Ra 0.4 µm on request and threads and O-ring grooves cut to your drawing.
Made-to-print VCR-type fittings: glands, nuts and gaskets, electropolished and packed particle-free.
Rings, spacers, insulators and wear parts machined burr-free from PEEK, POM, PA66 and PTFE. Upload your drawing and get a quote within one business day.
Nozzles, hex fittings, inserts and connector bodies machined in free-machining brass, plated on request.
Lead screws, pistons, rotors and shafts in 1215, 12L14 and 4140, each lot traced to its mill heat number. Upload your STEP file and drawing for a quote.
Send your CAD drawings, 2D/3D files, or technical documents securely. Our team reviews promptly, protects your IP fully — and signs an NDA on request.